Antenna Amplifier -R24-, REMOVING AND INSTALLING, SEDAN: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the D-pillar trim panel. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -2- and -5- on the Antenna Amplifier -R24- -1-.
-- Loosen the screw -3- several turns and remove the Antenna Amplifier -R24- -1- from the D-pillar -4-.