LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Communication) >> 91 Communication >> Antenna Systems >> Antenna Amplifier, Removing And Installing >> Antenna Amplifier -R24-, REMOVING AND INSTALLING, AVANT/ALLROAD >> Removing

Antenna Amplifier -R24-, REMOVING AND INSTALLING, AVANT/ALLROAD: Removing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -1- and -4- on the Antenna Amplifier -R24- -2-.

Fig 1: Identifying Antenna Amplifier 4 -R113-
GWWA91-11825Courtesy of AUDI OF AMERICA, LLC

-- Loosen the screw -3- several turns and remove the Antenna Amplifier -R24- -2- from the rear lid.