Overview - Rear Shelf
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Shelf
- Removing and installing. Refer to REAR SHELF, REMOVING AND INSTALLING .
- Insert the rear shelf in the rear window frame and press on the shelf until it clicks into place
- Child Seat Anchor Cap
- Equipped on some models, quantity: 2 or 3
- Removing and installing. Refer to UPPER CHILD SEAT ANCHOR COVER IN REAR SHELF, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Bolt
- Quantity: 4
- 2 Nm
- Speaker Trim
- Quantity: 2
- Equipped on some models
- Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
- Insert in the rear shelf and press on it until it clicks into place
- Clip
- Quantity: 4
- insert in the rear shelf
- Remove any remaining clips in the body mounting points using the Omega Clip Tool :T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Rear Window Frame Trim Panel
- Removing and installing. Refer to REAR SHELF, REMOVING AND INSTALLING .
- Expanding Clip
- Quantity: 3
- Removing with Pliers :T40172C