Headliner, Removing And Installing, Sedan: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of injury due to involuntary deployment.
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
-- Align the headliner, press in the centering pin at the rear of the headliner until it engages audibly in the body mounting point.
-- Install the center support for the sun visor. Refer to SUN VISOR CENTER SUPPORT, REMOVING AND INSTALLING .
-- Stretch the inner door seal lip over.
Versions equipped with a sliding sunroof:
-- Clip the sides of the headliner into the sunroof frame first, and then into the front and rear.
Further installation is performed in reverse order of the removal.