Overview - Rear Lid Trim Panel, AVANT
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Lid Hinge Trim Panel
- Quantity: 2
- Clip onto the rear lid hinge
- Clip
- Quantity: 4
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool :T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Tail Lamp Cover
- Quantity: 2
- Clipped in the rear lid trim panel
- Clip
- Quantity: 10
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool :T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Rubber Buffer
- Quantity: 6
- Insert in the trim panel
- Expanding Nut
- Quantity: 2
- Clip into rear lid
- Rear Lid Latch Trim Panel
- Removing and installing. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING, AVANT .
- Press on until it engages audibly
- Rear Lid Lower Trim Panel
- Removing and installing. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING, AVANT .
- Press on until it engages audibly
- Bolt
- Quantity: 2
- 2 Nm
- Emergency Release Cover
- Unclip using the Trim Removal Wedge :3409
- Clipped in the rear lid trim panel
- Emergency Triangle Cover
- Engaged in the rear lid trim panel
- Bolt
- Quantity: 2
- 2 Nm
- Rubber Buffer
- Quantity: 4
- Insert in the trim panel
- Clip
- Quantity: 4
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool :T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Rear Lid Upper Trim Panel
- Removing and installing. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Press on until it engages audibly