Overview - Luggage Compartment Side Trim Panel, Sedan
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- Quantity: 4
- Insert in the trim panel
- Remove any clips remaining in the mounting points using the Omega Clip Tool :T40280 and insert them into the trim panel for installation.
- Replace damaged or deformed clips
- Tie Down Bracket
- Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
- Trailer Hitch Button Trim
- Equipped on some models
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN LUGGAGE COMPARTMENT .
- Clip
- Quantity: 2
- Insert in the trim panel
- Remove any clips remaining in the mounting points using the Omega Clip Tool :T40280 and insert them into the trim panel for installation.
- Replace damaged or deformed clips
- Lid Hinge Frame
- Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
- Engage in the trim panel and press on it until it engages audibly
- Bolt
- Quantity: 2
- 1.8 Nm
- Expanding Nut
- Quantity: 2
- Clipped in the rear shelf
- Bag Hooks
- Removing and installing. Refer to BAG HOOK, REMOVING AND INSTALLING .
- Expanding Clip
- Quantity: 2
- Removing with Pliers :T40172C
- Luggage Compartment Side Trim Panel
- Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
- Press on until it engages audibly
- Stretch the lip of the rear lid seal over
- Bolt
- Quantity: 2
- 9 Nm
- Tie Down
- Quantity: 2
- Removing and installing. Refer to TIE DOWN, REMOVING AND INSTALLING .
- Lock Carrier Trim Panel
- Removing and installing. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .
- must engage in the pins
- Press on until it engages audibly
- Stretch the lip of the rear lid seal over