Speaker Trim, Removing And Installing

Special tools and workshop equipment required 

• Wedge Set :T10383 
  Fig 1: Identifying Wedge Set

  Courtesy of AUDI OF AMERICA, LLC

Center Speaker Trim, Removing:

Fig 2: Speaker Trim

Courtesy of AUDI OF AMERICA, LLC

-- Detach the speaker trim -1- using the Wedge Set :T10383/1  -arrow- by only sliding the wedge approximately 2 mm into the seam under the speaker trim.

-- Disengage the remaining tabs for the speaker trim along the seam.

-- If necessary, insert a long screwdriver forward under the speaker trim and disengage the front retaining pin.

Outer Speaker Trim, Removing:

Fig 3: Outer Speaker Trim

Courtesy of AUDI OF AMERICA, LLC

-- Using the Wedge Set :T10383/1  , carefully detach the speaker trim -1- along the seam -arrow- by inserting the wedge approximately 2 mm into the seam under the speaker trim.

-- Release the remaining retainers for the speaker trim and remove it.

Installing

Install in reverse order of removal.