Light Switch Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Remove the expanding clip/screw -arrow A-.
-- Unclip the light switch trim -1- with the light switch using the Trim Removal Wedge :3409 -arrow B-.
-- Disconnect the connector and remove the light switch trim with the light switch.