Infotainment System Display Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Remove the light switch trim. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .

-- Remove the A/C display control head trim. Refer to DISPLAY CONTROL HEAD TRIM, REMOVING AND INSTALLING .

-- Remove the MMI screen covers. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .

-- Remove the center vent / outer front passenger side instrument panel vent. Refer to CENTER VENT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- If installed, pull back the instrument cluster -1- slightly.

-- Remove the bracket -2- for the Infotainment system display toward the rear from the infotainment system.

-- Unclip the wire on the bracket and remove the infotainment system display bracket.