LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Ignition/Glow Plug System (4-Cylinder Direct Injection 2.0L 4V TFSI) (DNVB)) >> 28 Ignition/Glow Plug System >> Ignition System >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Removing

Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left air duct pipe. Refer to LEFT AIR DUCT PIPE, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

GWWA24-11207Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and remove the Engine Speed Sensor -G28-.