Upper Timing Chain Cover, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace the gaskets and seals if damaged or leaking.
Replace the O-rings after removing them.

-- Coat the seals and the O-rings with engine oil.

Seal installation position: smaller inner diameter outward.

-- Install the camshaft adjustment valves. Refer to Camshaft Adjustment Valve 1 -N205- / EXHAUST CAMSHAFT ADJUSTMENT VALVE 1 Exhaust Camshaft Adjustment Valve 1 -N318-, REMOVING AND INSTALLING .

-- Install the engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .