LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Lubrication (4-Cylinder Direct Injection 2.0L 4V TFSI Engine) (DNVB)) >> 17 Lubrication >> Engine Oil Cooler >> Mechanical Switch Valve, Removing And Installing >> Removing

Mechanical Switch Valve, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

-- Remove the mechanical switch valve -1- from the sub-assembly bracket -arrow-.

Fig 1: Identifying Mechanical Switch Valve
GWWA17-10918Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals