LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Lubrication (4-Cylinder Direct Injection 2.0L 4V TFSI Engine) (DNVB)) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler, Removing And Installing >> Removing

Engine Oil Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

-- Remove the bolts -4 and 5- and the engine oil cooler -3- with the seal -2- from the sub-assembly bracket -1-.

Fig 1: Identifying Oil Cooler, Bolts And Seal
GWWA17-10228Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals