LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Exhaust System, Emission Controls (4-Cylinder Direct Injection 2.0L 4V TFSI Engine) (DNVB)) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Muffler, Removing And Installing >> Muffler, Removing And Installing, AUDI A3 From My 2021/Q2 From My 2016/AUDI Q3 From My 2019/TT From My 2015 >> Removing

Muffler, Removing And Installing, AUDI A3 From My 2021/Q2 From My 2016/AUDI Q3 From My 2019/TT From My 2015: Removing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear tunnel brace. Refer to Repair Information .

GWWA26-11377Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of injury due to flying soot particles.

Irritation and injury to skin and eyes possible.

- Wear protective eyewear.

- Wear safety gloves.

-- Loosen the clamping sleeve -arrow- and push it toward the rear.

-- Tie up the catalytic converter.

Audi A3 from MY 2021 with FWD/TT from MY 2015:

GWWA26-11275Courtesy of AUDI OF AMERICA, LLC

-- Disengage the mounting -2- from the exhaust system rear section.

CAUTION:

Risk of accident due to the heavy weight of the muffler.

- A second technician is required for the following work steps.

-- Remove the bolts -3- left and right as well as bolt -4- and remove the muffler -1-.

Audi A3 from MY 2021/Q2 from MY 2016 with AWD

GWWA26-11353Courtesy of AUDI OF AMERICA, LLC

-- Disengage the mounting -3- from the exhaust system rear section.

CAUTION:

Risk of accident due to the heavy weight of the muffler.

- A second technician is required for the following work steps.

-- Remove the bolts -1 and 2- and then remove the muffler.

Audi Q3 from MY 2019 with AWD:

GWWA26-12052Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of accident due to the heavy weight of the muffler.

- A second technician is required for the following work steps.

-- Remove the bolts -arrows- and then remove the muffler.