Component Location Overview - Main Fuse Panel
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Connector
- For the Battery Interrupt Igniter -N253-
- Nut
- Replace after removing
- Quantity: 2
- Tightening specification. Refer to OVERVIEW - BATTERY INTERRUPT IGNITER .
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Tightening specification: 7.5 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Tightening specification: 7.5 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Tightening specification: 7.5 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Bolt
- 3.5 Nm
- Main Fuse Panel
- Only versions with battery in luggage compartment
- On the battery
- Removing and Installing. Refer to MAIN FUSE PANEL ON BATTERY, REMOVING AND INSTALLING .
- Nut
- 15 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Battery Interrupt Igniter -N253-
- Removing and Installing. Refer to BATTERY INTERRUPT IGNITER, REMOVING AND INSTALLING .