Right A-Pillar Connector Station, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the A-pillar lower trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Release the retainers in the direction of -arrows- and disengage the connector station -1- at the A-pillar.
-- Disconnect the connector -2-.
-- Release the retainer -3- in the direction of -arrow- and push the connector terminal -2- out of the bracket -1-.