Timing Mechanism Drive Chain, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
- Replace bolts that were tightened with an additional turn after removing them.
-- Bring the timing mechanism drive chain -2- into the installation position according to the identification applied.
-- Bring the guide rail -1 and 4- into the installation position.
-- Install the chain tensioner and tighten the bolts -3-.
-- Push back the guide rail of the chain tensioner for the drive chain with a screwdriver -arrow- and remove the Locking Pins:T03006 .
Install in reverse order of removal. Note the following:
-- Install the camshaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .