LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Crankshaft, Cylinder Block (Servicing - 5-Cylinder 2.5L TFSI Engine)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> Installing

Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Pivot the tensioner counter-clockwise.

-- Mount the ribbed belt on the ribbed belt pulley. Refer to Figure.

-- Release the tension on the tensioner.

-- Check the ribbed belt for correct positioning.

-- Start the engine and check the ribbed belt routing.

Additional procedures depending on the model. Refer to RIBBED BELT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals