Charge Air System, Checking For Leaks

WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Pay attention to the guidelines for clean working conditions. Refer to appropriate Service Information .

-- Loosen the hose clamps -2 and 3- and remove the air duct hose.

Fig 1: NO CONTENT

Courtesy of AUDI OF AMERICA, LLC

All procedures are described. Refer to CHARGE AIR SYSTEM, CHECKING FOR LEAKS .

Assembling

Assemble in the reverse order of removal. Note the following:

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Tightening Specifications

Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .