Charge Air Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.

Rest of World market version:

-- Remove the front impact member. Refer to appropriate Service Information .

Market-Specific for North America:

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

Continuation for All Vehicles:

Fig 1: NO CONTENT

Courtesy of AUDI OF AMERICA, LLC

-- Pay attention to the guidelines for clean working conditions. Refer to appropriate Servcie Information. .

-- Loosen the hose clamp -2- on the left and right sides and remove air duct hose.

-- Remove the left and right bolts -arrows- and remove the charge air cooler -3-.