Refrigerant Line Partial Section 2 From Condenser To Evaporator, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Coat the O-rings with refrigerant oil before installing. Refer to SEALS AND GASKETS .
-- Clean the connections and check for damage.
-- Clip the refrigerant line -3- into the retainer -2-.
Install in reverse order of removal. Note the following:
-- Install the refrigerant line from the evaporator to the A/C compressor. Refer to REFRIGERANT LINE PARTIAL SECTION 1 FROM EVAPORATOR TO A/C COMPRESSOR, REMOVING AND INSTALLING .
-- Evacuate and charge the refrigerant circuit. Refer to REFRIGERANT CIRCUIT or Working with A/C Service Station (1 Of 2) / Working with A/C Service Station (2 Of 2) .