Rear Temperature Control Door Adjuster, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear temperature control door motor. Refer to Rear Temperature Control Door Motor -V137-, REMOVING AND INSTALLING .
-- Remove the bolts -4 and 7-.
-- Unclip the lever -1-.
-- Disengage the lever -2- at the left mounting eye by pushing it slightly to the side (shown with the actuator in the image).
-- Disconnect the adjuster -5-, turn it slightly to the left and then remove it to the left.