Upper Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the cylinder "3" ignition coil. Refer to IGNITION COILS, REMOVING AND INSTALLING .

-- Free up the wiring harness on the clip -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -arrows- and remove wiring duct -3- from bracket.

-- Remove the bolts -2-.

-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm:3094 .

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows- and remove the coolant hoses.

-- Remove the bolts -1- and remove the upper coolant pipe.