LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Cooling System 4-Cylinder Direct Injection 2.0L 4V TFSI Engine) (DNVB)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Front Coolant Pipe, Removing And Installing >> Removing

Front Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the air duct from the lock carrier. Refer to AIR DUCT ON LOCK CARRIER, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to DRAIN THE COOLANT .

-- Remove the bolts -arrows-.

GWWA19-13409Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -1 and 3- and lift the clamp -2- and remove the coolant hoses.

-- Remove the front coolant pipe.