Overview - Bevel Box Components, 0FN

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Characteristics of the bevel box. Refer to BEVEL BOX IDENTIFICATION .

Fig 1: Exploded View Of Bevel Box Components, 0FN

Courtesy of AUDI OF AMERICA, LLC

Circlip
- Replace
Washer
- Replace
Output Flange
- Removing and Installing. Refer to OUTPUT FLANGE, REMOVING AND INSTALLING, 0FN .
Seal
- Replacing. Refer to OUTPUT FLANGE, REMOVING AND INSTALLING, 0FN .
O-Ring
- Replacing. Refer to OUTPUT FLANGE, REMOVING AND INSTALLING, 0FN .
Housing Cover
O-Ring
- Replace
Bearings
- No replacement part
Shim
- No replacement part
Pinion
- No replacement part
Shim
- No replacement part
Bearings
- No replacement part
Seal
- Replacing. Refer to LEFT SEAL, REPLACING .
Cap
Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING .
- Installing. Refer to BEVEL BOX, INSTALLING .
Bleeder
Bleeder Cap
Seal
- Replacing. Refer to RIGHT SEAL, REPLACING .
Circlip
Needle Bearing
- Replacing. Refer to RIGHT FLANGE SHAFT NEEDLE BEARING, REPLACING .
Needle Bearing
- Replacing. Refer to RIGHT FLANGE SHAFT NEEDLE BEARING, REPLACING .
O-Ring
Flange Shaft
- Removing and Installing. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING, VEHICLES WITH AWD .
Fluid Filler Plug
- 20 Nm
Fluid Drain Plug
- 20 Nm
Bolt
- 38 Nm
- tighten in a diagonal sequence