Output Flange, Removing And Installing, 0FN: Notes

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Characteristics of the bevel box. Refer to BEVEL BOX IDENTIFICATION .

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required

Holding Fixture:VW313
Gearbox Support:T10108
Three-Arm Puller (Kukko 45/2):VAS 251 205
Puller - Crankshaft/Power Steering Seal:T20143
Chain Tensioner Locking Tool:T40265
Bearing Installer - Differential Bearing:40-21

Special tools and workshop equipment required

Seal Installer - Side Shaft:T40121

Courtesy of AUDI OF AMERICA, LLC
Sealing Grease. Refer to the Parts Information.
Locking fluid. Refer to the Parts Information.
M10 x 30 bolt (quantity: 2)
M12 x 10 nut (quantity: 4)