ENGINE FOR Transmission Fluid Auxiliary Hydraulic Pump 1 - V475-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the transmission fluid. Refer to TRANSMISSION FLUID, DRAINING AND FILLING .

-- AWD vehicles, remove the bevel box. Refer to BEVEL BOX, REMOVING .

-- Disconnect the connector for the Transmission Fluid Auxiliary Hydraulic Pump 1 -V475-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Guide the Puller:T10530 in hole.

Courtesy of AUDI OF AMERICA, LLC

-- Turn the knurled nut -2- clockwise until the puller clamps.

-- Using the Puller:T10530 carefully remove the pump motor horizontally to the side.