ENGINE FOR Transmission Fluid Auxiliary Hydraulic Pump 1 - V475-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Replace the seal.
-- Push the pump motor by hand evenly in the housing.
-- Tighten the pump motor.
-- Install the bevel box. Refer to BEVEL BOX, REMOVING .
-- Fill the transmission fluid (refer to TRANSMISSION FLUID, DRAINING AND FILLING ) and check the transmission fluid level (refer to TRANSMISSION FLUID LEVEL, CHECKING ).