Overview - MECHATRONIC
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission
- Dual-Clutch Transmission Mechatronic -J743-
- Removing and Installing. Refer to MECHATRONIC, REMOVING AND INSTALLING .
- Bolt
- Replace after removing
- Tightening specification and sequence. Refer to Fig 2.
- Seal
- Replace
- Bolt
- Replace after removing
- 8 Nm +60°
- Clip
- Replace
- Transmission Fluid Pan
- Replace after removing
- Removing and Installing. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .
Dual-Clutch Transmission MechatronicJ743 - Tightening specification and sequence
- Replace bolts that were tightened with an additional turn after removing them.
-- Tighten the bolts in the steps in the sequence shown:
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -1 to 9- | Install all the way by hand |
| 2. | -1 to 9- | 8 Nm |
| 3. | -1 to 9- | 45° additional turn |