Central Locking -Safe- Indicator Lamp -K133-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
TIP:
The new Central Locking -Safe- Indicator Lamp -K133- must be connected with the door trim panel wiring harness.
-- Disconnect the wire and connect it with the new wire for the Central Locking -Safe- Indicator Lamp -K133-. Refer to WIRING HARNESS AND CONNECTOR REPAIRS .