12 V Socket -U5-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
CAUTION:
Risk of injury due to the preglow from the removed cigarette lighter socket.
- Check the tab on the socket.
- After removing the socket, push the springs back together carefully.
-- Remove the support -1- from the Cigarette Lighter Release Tool: T40148 .
-- Slide the piston down and hold it in place.
-- Turn the thumbwheel -4- at the Cigarette Lighter Release Tool:T40148 counter-clockwise -arrow-, doing so, the release tabs -2- at the 12 V Socket -3- are loosened and the Cigarette Lighter Release Tool:T40148 can be removed.