LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Rear Window Washer System >> Washer Nozzle, Adjusting

Washer Nozzle, Adjusting

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Adjust the spray nozzles for the rear window washer system. Refer to WINDSHIELD WASHER SYSTEM, CHECK SPRAY PATTERN AND ADJUSTING IF NECESSARY .

-- Clean the dirty washer nozzle if the spray field does not match the specifications.

Washer Nozzle, Cleaning:

CAUTION:

Risk of damaging the spray nozzles due to improper handling.

- Do not use any objects to clean the washer nozzles.

-- Remove the washer nozzle. Refer to WASHER NOZZLE, REMOVING AND INSTALLING .

-- Rinse the washer nozzle with clean water opposite the spray direction.

-- To remove any remaining contaminants, the washer nozzle may only be blown out with compressed air in the opposite direction of the spray direction.

-- If the spray field still does not correspond to the specifications, replace the washer nozzle.