Dust Cap, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Brake caliper piston is driven back.
- The parking brake motor is removed. Refer to Left Parking Brake Motor -V282- /Right Parking Brake Motor -V283-, REMOVING AND INSTALLING .
- Install the entire repair kit when servicing.
CAUTION:
There is a risk of destroying the ball thread by removing from the brake caliper piston and thrust nut.
- Never completely remove the brake caliper piston and thrust nut.
-- Remove the brake caliper piston maximum 20 mm -dimension a- counter-clockwise -arrow- using the Hex Socket: T10621 .
-- Remove the protective cap from the brake caliper using the Trim Removal Wedge:3409 .