Bearing Bushing And Guide Pin, Replacing: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the new bearing bushing into the brake caliper.
- The bearing bushing must be seated in the center of the brake caliper.
-- Push the guide pin into the bearing bushing.
-- Check both guide pins for ease of movement.
- Both guide pins must be able to slide.
-- Install the brake pads. Refer to BRAKE PADS, REMOVING AND INSTALLING .