Dust Protector And Guide Pin, Replacing, Single-Piston Brake Excluding 1ZD: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Lubricate the guide pin before inserting.
-- Slide the dust protector over the groove on the guide pin.
-- Slide the guide pins -3- with the dust protector -2- through the brake carrier -1-.
-- Press the dust protector over the groove on the brake carrier.