Steering Column Switch Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Place the front wheels in a straight-ahead position - steering wheel neutral position.
-- Move the steering wheel as far to the rear and down as possible. Use the full steering column adjustment range for this.
-- Remove the driver airbag. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
-- Remove the steering wheel. Refer to STEERING WHEEL, REMOVING AND INSTALLING .
-- Remove the lower steering column trim panel. Refer to LOWER STEERING COLUMN TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Remove the bolt -arrow-.
-- Remove the steering column switch module -2-.