LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Exterior Lights, Switches) >> 94 Exterior Lights, Switches >> Steering Column Switch Module >> Steering Column Switch Module, Removing And Installing >> Notes

Steering Column Switch Module, Removing And Installing: Notes

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

The Steering Column Electronics Control Module -J527- with the Spiral Spring -F350- is integrated into the steering column switch module.

If the steering column switch module must be replaced, the following progress applies:

-- Connect the Vehicle Diagnostic Tester .

-- Select the Diagnostic  mode and start the diagnosis.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.