Damaged Side Window, Removing
- Pay attention to the repair information. Refer to REPAIR INFORMATION .
Special tools and workshop equipment required
- Window Cutter:V.A.G 1561A
- Window Cutter - Blade, Offset:V.A.G 1561/10
-- In the window cutting area, protect the side panel and roof against paint damage with adhesive tape -arrow-.
Risk of injury to the hands and eyes from glass fragments.
Getting cut is possible.
- Wear protective eyewear.
- Wear safety gloves.
-- Protect the body and vehicle interior from glass splinters.
-- Tape off the flange all the way around with fabric-reinforced adhesive tape.
-- Remove the glass pieces up to the adhesive.
-- Slide the protective film (for example from Cutting Tool for Bonded Windows:VAS 6452 ) between the trim panels and the window rests.
-- Cut through the adhesive (with glass remnants) in the opening for the window using a Window Cutter:V.A.G 1561A and Blade Offset:V.A.G 1561/10 (with stopper roll).