Window Guide, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Move the door window -1- into the position "half open".
For an easier installation, spray the window guides with soapy water, for example.
-- Insert the window guides -2 and 3- in the guide rail -arrow-.
-- Install the window guide on the door flange in the sequence -1 through 5-.
| Step | |
|---|---|
| 1. | -- Position the upper window guide corner -A- on the C-pillar door flange and align it with the C-pillar trim by installing the C-pillar trim without using screws. Refer to DOOR C-PILLAR TRIM, REMOVING AND INSTALLING . |
| 2. | -- Position the upper window guide corner -B- on the B-pillar door flange and align it with the B-pillar trim by installing the B-pillar trim without using screws. Refer to B-PILLAR DOOR TRIM, REMOVING AND INSTALLING, REAR . |
| 3. | -- Push on the upper window guide -C-, working from the outside toward the inside. |
| 4. | -- Insert the window guide -D- completely in the B-pillar guide rail. |
| 5. | -- Insert the window guide -E- completely in the C-pillar guide rail. |