Rear Lid, Removing And Installing, SPORTBACK: Installing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Adjust the rear lid. Refer to REAR LID, ADJUSTING .

-- Calibrate the Rearview Camera -R189-. Refer to REARVIEW CAMERA SYSTEM, CALIBRATING .

Note the conditions here for a required calibration of the Rearview Camera -R189-.

-- Calibrate the Rear Peripheral Camera -R246-. Refer to PERIPHERAL CAMERA, CALIBRATING .

Note the conditions here for a required calibration of the Rear Peripheral Camera -R246-.

Tightening Specifications

Refer to OVERVIEW - REAR LID, SPORTBACK