Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, ADAPTING

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic operating mode.

-- Select the Test plan tab.

-- Select the Select individual test button and select the following tree structure consecutively:

Diagnostic-capable systems
006D - Rear Lid Electronics J605
006D - Rear Lid Control Module, Functions
006D - Basic Setting, Rear Lid Control Module

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.