Rear Lid Closing Aid -VX16-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Disengage the cable bracket -7- to do so release the catches -A arrows-.
-- Disengage the release cable nipple -6- from the release lever -5-.
-- Disconnect the connector -3-.
-- Release the catches -2, 4 and 8- by turning them 90° clockwise -arrow B-.
-- Remove the Rear Lid Closing Assist Motor -V382- -item 1-.