Adjusting Buffer, Removing And Installing, Sedan: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the rear lid lower trim panel near the adjusting buffer. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Turn the adjusting buffer -1- counter-clockwise -arrow- and remove it.