Overview - Release in Vehicle Interior

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Hood Release (In Vehicle Interior)

Courtesy of AUDI OF AMERICA, LLC

Operating Lever
- For the hood latch
- Removing and installing. Refer to HOOD LATCH OPERATING LEVER, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- 2 Nm
Mounting Bracket
- For hood latch operating lever
- Removing and installing. Refer to LATCH RELEASE LEVER MOUNTING BRACKET, REMOVING AND INSTALLING .
Expanding Nut
- Quantity: 2
Release Cable
- For hood latch operating lever
- Removing and installing. Refer to HOOD RELEASE CABLE, REMOVING AND INSTALLING, LHD .
Grommet
- Check for proper seating
Clip
- For the release cable
Cap
Nipple
- Is inserted in the coupling guide element
Coupling with Release Cables
- For the hood latch
- Removing and installing. Refer to LATCH RELEASE CABLE, REMOVING AND INSTALLING, LHD .
Adjusting Thumbwheel
- For the release cable
- For adjusting the trigger point for the hood latch
Clip