Latch Release Lever Mounting Bracket, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the operating lever for hood latch. Refer to HOOD LATCH OPERATING LEVER, REMOVING AND INSTALLING .
-- Remove the A-pillar lower trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Loosen the release cable -2- from the cable bracket -3- and disengage the release cable nipple -4-.
-- Remove the bolts -arrows-.
-- Remove the mounting bracket -1-.