Insulation, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- First slide the insulation over the tabs on the rear edge and into the designated cut-outs on the inner panel -3-.
-- Insert the tabs at the front edge and sides.
-- The clips must engage audibly when pressing in.