LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Hood, Lids) >> 55 Hood, Lids >> Fuel Filler Door Unit >> Emergency Release Cable, Removing And Installing >> Removing

Emergency Release Cable, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the fuel filler door unit. Refer to FUEL FILLER DOOR UNIT, REMOVING AND INSTALLING .

-- Remove the fuel filler door lock motor. Refer to Fuel Filler Door Lock Motor -V155-, REMOVING AND INSTALLING .

-- Thread the release cable -1- out of the guide -4-.

GWWA55-11112Courtesy of AUDI OF AMERICA, LLC

-- Disengage the tab -3- on the emergency release mount -2- and remove it from the cable bracket.