Charge Door Unit, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Release the retainers -2-.
-- Pivot the cap -1- out of the charge door unit -arrow-.
-- Open the charge door unit -1-.
-- Remove the expanding rivets -2-.
-- Pivot the charge door unit -1- slightly out of the fender -arrow-.
-- Disconnect the connectors.
-- Guide the charge door unit -1- out of the fender.