LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Bumpers) >> 63 Bumpers >> Front Bumper >> Blind Cover In Bumper Cover, Removing And Installing >> Blind Cover In Bumper Cover, Removing And Installing, S3 >> Removing

Blind Cover In Bumper Cover, Removing And Installing, S3: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Left Side of Vehicle:

-- Remove the windshield washer fluid reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

Right Side of Vehicle:

-- Remove the wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Unclip the air duct -1- carefully to the outside from the radiator -arrow- and leave it in the installation position.

GWWA19-13411Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- and remove the auxiliary radiator -2- with the bracket -1- and move it to the side.

GWWA19-13628Courtesy of AUDI OF AMERICA, LLC

-- Slide down the air duct as far that the blind cover becomes available.

Continuation for Both Sides:

GWWA63-11360Courtesy of AUDI OF AMERICA, LLC

-- Remove the clamp -1- upward -arrow A- and remove the blind cover -2-.