Determining The Correct Tire Package Using The Version Key: Notes

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

There Are Three Options for Determining the Tire Package Assigned to a Vehicle:

Using the version key in the certificate of registration part 1. Refer to CERTIFICATE OF REGISTRATION PART 1
Using the version key in the certificate of registration part 2
Using the version key in the EG declaration of compliance (COC-paper). Refer to CERTIFICATE OF CONFORMITY (EG CERTIFICATE OF CONFORMITY) .

Breakdown of the version key in the certificate of registration part 1 under D2. Refer to CERTIFICATE OF REGISTRATION PART 1 .
Selecting a possible wheel/tire combination. Refer to WHEEL AND TIRE GUIDE, VEHICLE SPECIFIC PORTION .

Example:

1 - The displacement in cm³ is in the certificate of registration part 1 under P.1 and the output in kW can be found under P.2; this shows which engine with which output is installed in the vehicle.

2 - The code e.g. RT01 is included in the version key for the tire package.

4 - With these three selection criteria it is possible to determine the wheel/tire combination of the actual vehicle. Refer to WHEEL AND TIRE GUIDE, VEHICLE SPECIFIC PORTION .